This Episodes Questions:

Brians Questions:

Hey all, great podcast, thank you for doing what you do.

What are some favorite Christmas gifts to make with scrap wood?
Specific context for me:  been woodworking for a while, hobbyist, been giving gifts to people for years and now I've lost track of who has gotten what.  Just trying to get some ideas for this year.  Time is easier to give to a project than money.  I also like the lathe for scrap projects.  Have found a good glue up can make a good looking bowl.
Follow up/more specific questions:
What are some favorite scrap wood projects that are not kits from Rockler (or similar companies)?
Other than a bowl, what are some other gifts that can come off the lathe?
What are some non kitchen items to make from scrap wood?  (I believe I've given too many cutting boards, charcuterie boards, cooking utensils over the years).  Jim

Hello friends, 

I haven't submitted a question in a hot minute, as the kids say, but I finally have a good one for you and it's regarding something I'm truly stumped about. After hitting you guys with question after question about, "How do I do _______ without a jointer or planer?" I finally got myself a thickness planer. It's louder than all hell, and it's nothing fancy, but I'm glad I have it. 
There's only one issue that I'm having with it, and I can't figure out what's causing it. When I'm getting ready to Mill down some stock, I first set the height of the planer blades so they aren't taking off any material at the start. The depth of cut indicator is at "0". I'll even send the board through with the blades at this height sometimes just to make sure the gauge is accurate. I then lower the blades by 1/64", aka a quarter turn of the handle. I send the piece of stock through, it takes off some material, whatever. So far, so good.
Here's what's throwing me off: after I've fed that board through the planer, I can feed that same board right back through, with the blades still set at the same height, and the planer will take off about the same amount of material, from the sound of it. This doesn't only happen on a second pass, either. I can feed the same board through the planer six, seven, or eight times, without adjusting the cutting depth, and the planer continues to remove material at each pass. Unless I'm missing something about how planers work, I would think that the material should have been planed down to thickness on the first pass. I can't figure out why it continues to remove material after multiple passes when I haven't changed the settings. This happens to me every time I use my planer.
Not sure if this is relevant but I have a Ridgid #R4331 planer. I also attached a link to a very loud video demonstrating this phenomenon. Thank you in advance for your help and expertise, and thank you for continuing to take the time to put out this phenomenal woodworking podcast. I hope your projects are doing well, and I hope you're doing even better.
Sincerely,  Zachary T Owens

Guys Questions:

Hello,

Thank you for the great podcast and for answering my questions. I have a question on using Transtint dye. I heard Guy and Huy mention they use it. Not sure about Brian. Anyway, I screwed up 2 projects when trying to apply it. In both cases I mixed it into Zinser Sealcoat shellac. Firs time applied with foam brush on elm. The second time wiped on on maple plywood. In both cases, the color was very inconsistent. I ended up throwing away the plywood and sanding the elm back to bare wood. 
My question is, is it ok to add Transtint dye to shellac? If so, what could be my problem?
More importantly, can you tell me the process you follow to apply Transtint dye?
The dye I was using is Transtint Dark Walnut. Max

I have owned my Sawstop cabinet saw for nearly a year now and I have consistently been impressed with the quality of the machine. One thing that has bugged me since I got the saw is the occasional binding I get when I do a rip cut especially. I have meticulously aligned the fence with the blade/miter slots and with a dial indicator jig to be parallel. I thought it may be internal stresses in the wood but I have the same issue ripping plywood or MDF. I finally figured out the problem. I am using Freud thin kerf blades which have a kerf of 0.091" inches according to the manufacturer. My riving knife is a few thousands thicker than this . Sawstop offers a thin riving knife but I have seen mixed opinions and wanted to get your guys' take on it since I know at least one or two of you have the Sawstop cabinet saw. Have you ever had this problem? Thanks! Adam

Huys Questions:

Dear Woodshop Life Podcast Senseis,

Thank you again for your awesome podcast.  New listener.  Finally finished all podcasts and now going back and listening to them all again.
This is my second question submitted in the past few months.
Just as I prefaced in my last question/submission, I am in the process of setting up my workshop in a one car space of a three car garage.
One of the first things I built in my current workshop was a miter saw station using 2x4’s and plywood.  I’m glad I used relatively inexpensive materials, because after only a few months I realized that I allocated too much space to an immobile monolith in my small workshop.
I plan to build a mobile miter saw station with collapsable wings to replace my current miter saw station.  The wings when extended will support longer material and when folded will create a smaller footprint.
I recently watched Guy’s video entitled “Build This Small Sturdy Workbench” on his YouTube channel.  The base of the workbench gave me an idea for the base for my miter saw.  I’ll add retractable casters to make it mobile.
I want to buy a hollow chisel mortiser for this and future projects.  Based on my budget of $600, I think that limits me to a benchtop model.  Are there any benchtop hollow chisel mortisers in my price range that you might suggest?
Thank you again for the great podcast and thank you in advance for your advice.
Best,
Darryl Noda (Wildfield Workshop)

I discovered your podcast earlier this year and have now gone back and listened to the entire back catalog while making sawdust in the shop. I appreciate all the knowledge you are sharing with the entire woodworking community.

A question I have recently started thinking about is what would happen with my workshop if something happened to me. I have invested a considerable amount of money in tools from a Sawstop, Laguna Pflux dust collector and Harvey router table, to planes, chisels, and way too many Woodpecker tools. But neither of my kids nor other family members are interested in woodworking, and they wouldn't know what to do with a workshop full of tools. Have you made plans for how to sell or donate your tools? I have created a Will and Trust for my house and financial assets, but I think having a solid plan for the Workshop would be very helpful for my family, but I don't know where to start. Any ideas for community groups that could be donated to, or how the tools could be sold to the right audience? I happen to live in the Indianapolis area as well, so any specific suggestions would be welcome, as well as general ideas.Kevin